2021 - featured below (180kb)

• Thermocouples B, C, D, E, G, J, K, L, N, R, S and T
  Pt100/1000, Ni100, 0/4...20 mA, 0...5/10V,
  -10...+10V, potentiometer
• 6-digit processor-based LED display
• Sensor selection and scaling via front panel keys
• Galvanically isolated output 0/4...20 mA, 0...10V
• 2 to 4 adjustable alarm relays
• Serial output RS-485 and RS-232
• Linearity for process inputs < 0.007 % FS
• Wide power supply range 85...240 VAC
• 12...32 VDC/ 24 VAC
• Font panel protection IP65

Data Sheets

• For process input 4-20 mA without external power supply
• Loop resistance 240 ohm only
• 4-digit processor based display
• Scaling on front panel
• 2 settable alarms
• Passwords for alarms and configuration
• Front panel rating IP 65

Data Sheets

• RTD Sensors Pt100, Pt1000
• Thermocouples B, C, D, E, G, J, K, L, N, R, S or T
• Process Inputs 0/4...20 mA or 0...10 V
• 2-wire output 4...20 mA
• Freely scalable 4-digit bright LED display
• Configuration via front panel
• 2 alarm relays
• 6 points xy linearisation for process inputs
• Password for configuration
• Front panel protection

Data Sheets

910 & 920-2011 as featured below (55kb)

• Process inputs 0/4...20 mA, 0...5/10 V, potentiometer
• 4 or 5 digit processor based LED displays
• Digit sizes 57mm and 100mm
• Display scaling with keys and a mini display
• 2 adjustable alarm relaysas an option
• Alarm reset, display hold and taring by external contact
• Power supply 24 VDC
• Front panel protection IP54

See Also

• 910 & 920-2021 - Multi input
• 910 & 920-2026 - Totalizer/batch controller for 4..20mA/ 0-10VDC input
• 910 & 920-2051 - Tachometer for pulse sensors
• 910 & 920-2061 - Scalable counter for incremental encoders
• 910 & 920-2071 - RS232 & RS485 Serial input
• 910 & 920-2081 - BCD Input

• Display scaleable to show engineering units
• Programme lock out facility
• AC and DC powered models available
• Analogue re transmission option
• Dual relay output option
• RS485 communications option

Data Sheets

• Process input 4...20 mA, 0...60 mV
• 30 and dual 50 segment LED display
• Power supply 115, 230 VAC or 24 VDC

Data Sheets

• 8 input channels
• Thermocouples, RTD's, 0/4...20 mA, 0...5/10 V
• Inputs user selectable
• Each channel has individual input
• 2 relay alarms as standard
• 10 alarms as option
• 8 output 0/4...20 mA as option
• Serial port RS232 or RS485 as option
• Power supply 220 VAC or 24 VDC

Data Sheets

• Model 440 with 14.5mm display
• Model 441 with 25mm display
• 2 input channels, freely selectable
• Processor based
• Pt100-inputs, thermocouples, 0/4...20 mA, 0...10 V, potentiometers and 20...1000 mV
• Input and output programmable on front panel
• Individual settings of channels
• Galvanic isolated output 0/4...20 mA, 0...10 V
• 2 alarms as a standard
• Math functions between channels
• Accuracy 0.05...0.1%

Data Sheets